Exhaust Filterreplacement; Agitator Cleaning - Kenmore 116.31040 Manual De Uso Y Cuidado

EXHAUST FILTERREPLACEMENT
i
The HEPA exhaust filter must be replaced
when dirty. It should be replaced
regularly depending on use conditions.
The filter CANNOT be washed as it will
3. Place new filter cartridge into cover
making sure that airflow arrow on side of
cartridge points into cover.
Place foam seal of filter against the
lose its dust trapping ability.
Note: See PARTS AND FEATURES
for the exhaust filter number.
1. Remove
exhaust filter
cover by
pressing the
release tab on
the cover and
rotating out
from vacuum
cleaner.
2. Remove
the filter
cartridge
from cover.
Cover
Release
Tab
vacuum cleaner body.
Exhaust
Filter
Seat Against
Vacuum Cleaner
Body---.-
_-- Exhaust
Filter
4. Replace the exhaust filter cover by
placing bottom tabs in slots and rotating
in until cover snaps into place.
I AGITATOR CLEANING i
To maintain efficient cleaning, the agita-
tor must be kept.free of carpet fiber,
string, or hair build-up. After every 7 to
10 uses, unplug and turn vacuum cleaner
over and check agitator for fiber and
hair build-up.
Use scissors to remove any build-up
entangled around the agitator.
21