Kenmore 116.31040 Manual De Uso Y Cuidado página 19

PRE-RLTER CLEANWNG 1
The pre-filter is located inside the dust
cup. Check the pre-filter frequently and
clean when dirty.
i. Remove the dust cup as outlined in the
DUST CUP CLEANING section.
NOTE= Make sure dust cup is free of
debris before opening.
2. Rotate dust cup lid assembly counter-
clockwise as indicated on the lid and lift
off.
LOCKED
(For Use)
UNLOCKED
(For Cleaning)
3. Clean pre-filter
by gently tapping
over a trash
container. Tap on
several sides to
ensure best
cleaning.
If necessary, rinse
with cold water
only, DO NOT use
detergent or
soap. Allow parts
to dry 24 hours
before putting
back into vacuum
cleaner.
DO NOT wash in the dishwasher.
DO NOT install damp.
4. Replace the lower portion of the dust
cup by aligning marks as shown,
UNLOCKED (For Cleaning).
5. Rotate while pressing downward until
marks align as shown; LOCKED (For Use).
6. Replace the dust cup.
19