Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Pagina 4
The (safety) protection equipment can assure the operator's safety that the
motor cannot be operated if the upper-cover slipknot is loose.
1. Peel the vegetable (fruit), remove the pot, strip and slice the resting proper size
for juice pressing
2. Install the appliance according to the "Part Name" Chart, connect the power plug
to the power, press the switch, put the vegetable (fruit) into the juice press trough,
press the promotion bar down lightly and the original and healthy fresh juice will
be pressed.
The appliance cannot operate for long-time. To make the appliance serve more
effectively, be sure that the appliance should 1 stop for 1 min after operation for 1
min, 2 stop for 15 min after 3 time operation cycles and operate again until the motor
has already cooled down.
1. Please read the instruction carefully before use. DO NOT leave the appliance in
operation; keep the children away from the appliance.
2. DO NOT uncover the lid when the appliances in operation DO NOT put hand or
other devices into the juice press slipknot before cutting off the power, or injury or
damage would occur.
3. Usually check the juice-cup or residue trough when operation and handle them if
they are over load after cutting off the power.
4. DO NOT dismantle the appliance by oneself, please send the appliance with
defective power cable to specified service stations or the sales service section in
the factory for overhauling or replacement
5. The temp-controller installed in the appliance can stop the long-time or over load
operation automatically, and auto recover the normal operation after the motor
cool down (about 30 mins)
6. The appliance is only for domestic use while not for commercial use.
1. Please keep the idle appliance in the dry and good ventilated place to prevent the
motor damp or mould.
2. Please use the appliance usually to keep the motor dry.
Pagina 5
