Polygroup SUMMER WAVES Manual De Usuario página 10

5. Connect the Hose from the Return Fitting to the Filter Pump
13
Outlet
Filter Pump Outlet
7. Tighten all Hose Clamps
14
9. Air is now trapped inside the Filter Pump system, which will prevent
the water from flowing smoothly. To VENT the system (release the
trapped air), open the Vent Screw
turning it counter-clockwise. The water pressure will force out all
the trapped air inside the Filter Pump system. And the water will
come out the top once the air is removed. Tighten the Vent
Screw when you see water flowing out from the Seal Top
16
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8 AM to 5 PM Mon. thru Fri.
10
14
13
to prevent water leakage.
at the top of the pump by
16
MST. Extended operating days and hours during peak season requirements.
6. Connect the Hose
Inlet.
POOL
RETURN
FITTING
Filter Pump Inlet
8. Do not plug in the filter pump at this point. Begin to fill water until
the water level reaches the fill line.
10. Hand loosen the RF Locking Ring
Diverter
tighten the RF Locking Ring
NOTE:
.
18
from the pool Suction Fitting to the Pump
13
POOL
SUCTION
FITTING
. Adjust the Return Fitting
8
to maximize the calculate of the pool water. Hand
7
.
8
It is recommended to point the diverter down and away
from the suction or water intake for optimum pool
circulation.
8
360°