Tabla de contenido
Make sure that the printer is turned off. Connect the power cord to the
power supply's AC connector and to an electrical outlet. Also make sure
that the electrical outlet is appropriately grounded.
Turn on the printer using the on / off switch located on the left side of the
printer. Check if the Power On LED is lit. The printer will initialize and
indicate the printer status ( ).
Loading Paper
To load the paper roll, lift the cover lever and open the cover as shown
below. Close the cover holding a slip of paper towards the outside of the
printer. Look if the Info LED is lit. If the Info LED is green, your printer is
ready to use.
Up
1 - Lift cover lever
2 - Drop paper
Power supply´s
AC connector.
Observe paper side
as shown above.
3 - Close cover.
8
L'installation de votre imprimante
Déballage
Après avoir déballé l'imprimante, vérifiez si les éléments suivants figurent dans le coffret:
• Imprimante MP-4200 TH
• Guide de Référence Rapide (ce document)
• Câble d'alimentation
• Transformateur avec câble
• Rouleau de papier thermique
• Guide de réglage de la largeur du papier
Selon la configuration du produit et du système choisi.
69
Tabla de contenido
