Technical Specifications - Brunton RESYNC 3000 Guia De Inicio Rapido

Thank you for purchasing your new BRUNTON RESYNC hybrid solar charger. Designed
with the on-the-go, everyday user in mind, this charger integrates a lithium polymer
battery and solar panel to keep USB electronics going anytime, anywhere. These
instructions will help to optimize your RESYNC. Please register your product with us
by visiting bruntongroup.com/register
RESYNC 3000
Power Button
with LED Indicators
USB 5v/2.1a
Access Door
USB Output
HEATSYNC Optimized
RESYNC 6000
Power Button
with LED Indicators
USB 5v/1a
USB Output
USB 5v/2.1a
USB Output Micro USB Input
HEATSYNC Optimized

TECHNICAL SPECIFICATIONS

RESYNC 3000
Capacity: 3000 mAh
Solar Panel: 0.5W
Battery Type: Lithium Polymer
Input: 5V600mA
Output: 5V USB; 2.1A
Size: 5.2x3x.5 IN; 13.3x7.8x1.35 CM
Weight: 4.44 OZ; 126 G
CHARGING THE BRUNTON RESYNC
BRUNTON RESYNC includes a multi-function 2-in-1 cable.
To charge your RESYNC from your computer, simply plug the micro tip into the input
port on the RESYNC, and the opposite end into an active computer USB port or wall
adapter. The indicator will show yellow.
To charge by solar, simply place the RESYNC in direct sunlight with the solar panel
facing upwards and angled toward the sun.The indicator light will show green.
Brunton recommends charging by USB. Solar charging is recommended as a
secondary source when USB is not available or in emergency situations, due to long
charge times.
2
BR-Manual-RESYNC3000-6000 19.0.indd 2-3
Solar Panel
Micro USB Input
Access Door
RESYNC 6000
6000 mAh
0.75W
Lithium Polymer
5V600mA
5V USB; 2.1A and 1A
6.3x3.1x.65 IN; 15.7x8x1.65 CM
7.41 OZ; 210 G
RESYNC 3000
Charged by
PC or Wall
2-in-1
Adapter
Cable
RESYNC 6000
RECHARGE RATE TABLE
Wall Computer
4Hrs @ 1A 8Hrs @ 500mA
3000
2Hrs @ 2A 4Hrs @ 1A
7Hrs @ 1A 15Hrs @ 500mA 7Hrs @ 1A
6000
4Hrs @ 2A 7Hrs @ 1A
VERIFYING CHARGE
A single click of the power button will show the yellow indicator lights and give an
indication of the charge held in the RESYNC according to the chart below.
P= 0% 20% P 40%
USING THE RESYNC POWERBANK WITH
BRUNTON'S HEATSYNC PERSONAL
HEATING SYSTEM
The RESYNC has been optimized specifically to power Brunton's HEATSYNC line. When
using the RESYNC 3000, plug HEATSYNC USB cable into RESYNC USB output marked
with the HEATSYNC icon: and follow instructions included with the HEATSYNC
product.
When using a RESYNC 6000, ensure the HEATSYNC USB cable is plugged into the 2.1A
output marked with the HEATSYNC icon: and follow instructions included with the
HEATSYNC product. NOTE: HEATSYNC will not operate if plugged into the USB 1Amp
output.
CHARGING YOUR USB DEVICE
The included 2-in-1 cable is suitable for many handheld electronics. If your device has
a different interface, the device-specific USB cable included with your electronics
can also be used.
Simply connect your device to the USB output port on the RESYNC using the
appropriate cable, then press and hold the power button until the indicator light
shows yellow and your device begins to charge. A trickle charge mode activates when
your device reaches full charge.
RESYNC 3000
Charged by
Sunshine
RESYNC 6000
Auto (12V) Solar Panel
4Hrs @ 1A
30-40 Hrs.
2Hrs @ 2A
45-55 Hrs.
4Hrs @ 2A
40% P 60% 60% P 80% 80% P 100%
10/12/15 10:27 AM
3