Mr. Gasket 9710 Instrucciones De Instalación

FUEL PRESSURE REGULATOR – Mr. Gasket Part No. 9710
READ ALL INSTRUCTIONS CAREFULLY BEFORE BEGINNING INSTALLATION.
GENERAL INFORMATION
The Mr. Gasket Fuel Pressure Regulator #9710 is an ad-
justable fuel pressure regulator designed for use on fuel
systems equipped with a carburetor using 1/4", 5/16" or
3/8" I.D. fuel lines, not exceeding 8 PSI.
INSTALLATION PROCEDURE
Step 1
Tighten brass fittings so threads are fully engaged into
fuel regulator. Do not over-tighten fittings or fuel leaks
may result. NOTE: For a positive seal, use Mr. Gasket
Part No. 2842G thread sealing tape.
Step 2
After installing fuel regulator, start engine and check fuel
line and connections. All connections should be leak
proof to prevent a potential fire hazard or explosion.
NOTE: Fuel pressure adjustment is from 1 to 6 lbs.
QUESTIONS
Please call our Tech Support line at 1-216-688-8300,
M – F, 9 – 5 EST. Please have the part number on hand
when you call.
MR. GASKET LIMITED NINETY (90) DAY WARRANTY
Mr. Gasket which includes ACCEL, Hays, Lakewood,
Mallory and Mr. Gasket product lines, warrants its products
only to the original purchaser at retail to be free from
defects in material and workmanship for a period of 90
days from the date of original retail purchase, except that
the following products have longer warranty periods:
WHO IS COVERED:
The warranty extends to original purchaser at retail only,
with a proof of purchase.
WHAT IS COVERED:
All parts which are defective in materials or workmanship
on original installation only, subject to the following:
WHAT IS NOT COVERED:
1. Products which have been subjected to abuse, accident,
alteration, modification, improper installation, improper
operational adjustments, tampering, negligence,misuse, or
if repaired or serviced by anyone other than Mr. Gasket.
2. Actual or alleged labor, transportation or other incidental
charges.
3. Actual or alleged consequential damages incurred by
use of this product.
WHAT WE WILL DO:
Mr. Gasket at its election, will either repair or replace all
MR. GASKET
INSTALLATION INSTRUCTIONS
NOT FOR USE WITH FUEL INJECTED SYSTEMS.
www.mr-gasket.com
defective parts free of charge.
WHAT YOU MUST DO FOR THE WARRANTY SERVICE:
In the event that the original purchaser detects a defect
in the material or workmanship, the product(s) in question
must be returned by the original retail purchaser to the
place of original purchase for warranty determination. In the
event that the purchaser does not receive satisfaction from
the place of original purchase or in the event there are any
questions with regard to this limited warranty, please con-
tact the Technical Service Dept., Mr. Gasket, 10601 Mem-
phis Ave., #12, Cleveland, OH 44144, or call (216) 688-8300
ext. 5. Do not send alleged defective parts to Mr. Gasket
without prior approval to do so. If such approval is ob-
tained, the defective part and proof of purchase should be
sent, postage prepaid, to Mr. Gasket, at the above address.
NO OTHER WARRANTY, EXPRESS OR IMPLIED, IS
APPLICABLE TO THE PRODUCTS OR MR. GASKET.
THE DURATION OF ANY IMPLIED WARRANTIES,
INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, IS LIMITED TO THE DURATION OF THE
EXPRESS WARRANTY HEREIN. MR. GASKET SHALL
NOT BE LIABLE FOR THE LOSS OF USE OF THE
PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER
DAMAGES, DIRECT OR CONSEQUENTIAL, ARISING
OUT OF THE USE OF, OR INABILITY TO USE,THE
PRODUCT OR FOR ANY BREACH OF ANY EXPRESS
OR IMPLIED WARRANTY, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE APPLICABLE TO THIS
PRODUCT.
Some states do not allow the exclusion or limitation
of incidental or consequential damages or limitations
on how long an implied warranty lasts, so these limitations
or exclusions may not apply to you. This warranty
gives you specific legal rights and you may also
have other rights which vary state to state. Materials,
components, specifications, colors, model changes,
availability and prices are subject to change without
notice or obligation. Manufacturers' brand names,
trademarks and registered trademarks are used for
reference only and are not to imply that any product is
of their manufacture or any association herewith. Mr.
Gasket, makes no representation or warranty, express
or implied, that its products comply with local, State
or Federal emission levels, noise levels or safety standards.
The purchaser assumes all responsibility for
such use and compliance.
FORM 97102012
1