Care And Maintenance - Garden Treasures PG183H Manual Del Usuario

OPERATING INSTRUCTIONS
In any case of failure of normal ignition, please use the
lighter (sold separately) to reach the burner for ignition
through the hole on the bottom of burner diffuser. Insert the
lighter from the back side of the burner assembly
opposite to the control panel.
WARNING
If at any time you are unable to light burner and smell gas,
wait 5 minutes to allow gas to dissipate before attempting to
light heater.
WARNING
DO NOT touch or move heater for at least 45 minutes after
use. Allow emitter and dome to cool before touching.
WARNING: Avoid inhaling fumes emitt
first use. Smoke and odor from the burning of oils used in
manufacturing will appear. Both smoke and odor will
dissipate after approximately 30 minutes. The heater should
NOT produce thick black smoke.
0

CARE AND MAINTENANCE

Abrasive cleaners will damage this product.
Never use oven cleaner to clean any part of heater
Do not clean any heater part in a self-cleaning oven. The extreme heat will damage the finish.
More frequent cleaning may be required as necessary. It is imperative that control compartment,
burners and circulating air passageways of the heater be kept clean.
Spiders and insects can create a dangerous condition that may damage heater or make it unsafe.
Keep burner area clean of all spiders, webs or insects. Clean burner holes by using a heavy-duty
pipe cleaner. Compressed air may help clear away smaller particles.
Inspect heater before each use.
Have heater inspected annually and repairs should be made by a qualified service person.
Check heater immediately if any of the following conditions exist:
a. The smell of gas in conjunction with extreme yellow tipping of burner flames.
b. Heater does not reach proper temperature.
d. Burner makes popping noises during use.
Note: A slight pop is normal when burner is extinguished.
Carbon deposits may create a fire hazard. Keep dome and emitter clean at all times.
Do not clean heater with combustible or corrosive cleaners. Use warm, soapy water.
Do not paint engine, engine access panel or dome.
This heater should be thoroughly cleaned on a regular basis.
After a period of storage and/or non use, check for leaks, burner obstructions and inspect for any
abrasion, wear, cuts to the hose.
2
14