Magic Chef MCSCD6W3 Manual Del Usuario página 13

Drain Hose:
This unit has a special gray
drain hose included. If you
choose a permanent
installa on, you must
connect this hose to the
dishwasher drain threaded
connector. Use the hose
clamp supplied.
CAUTION: This work should be done by a qualified professional installer.
1) Decide the best loca on to run the hoses under the sink. Make sure
both hoses will reach before cu ng into the countertop.
2) The quick connect faucet adapter and hoses must be removed from
the unit for both the intake and drain connec ons.
3) Change the intake hose to a 3/4" and secure it ghtly.
4) Using the special gray hose supplied, ghten the hose to the drain connector.
5) Run both hoses below the sink and a ach as a permanent installa on for water
intake and drainage. The special drain hose should be a ached at one end to the
dishwasher, and the other end to the sink tail pipe (not included). Secure both ends
with a clamp (one clamp provided).
NOTE: The intake hose should be connected to the "HOT" water pipe. The drain hose should
be below the height of the base of the dishwasher.
6) Test the water connec ons to ensure that there are no leaks
7) Connect dishwasher to a 120 volt household, grounded outlet.
ay
u
d
Sink Drain
Dishwasher
Tail Pipe
(not included)
Hose Clamp
(not included)
ld b do b alified
Outlet Hose Clamp
Hose Connec ons for Permanent Installa on
Change intake valve to standard
3/4" dishwasher inlet hose
Water Hose
Connect to HOT
water pipe
Gray "L" Hose: Connect ends to
dishwasher and tail pipe.
fe io l installe
-PAGE 12-
Back of Dishwasher
Place clamp here
Outlet Hose Clamp