Cleaning The Filter - Winix PLASMAWAVE ZERO Manual Del Usuario

FILTER CARE

6. Cleaning the filter

Intervals between filter cleaning may vary depending on the air quality.
Use a vacuum cleaner or soft brush to clean
①
the Pre-filter. If it is excessively soiled, rinse
in room temperature water.
ˍ Do not use detergent or soap.
ˍ Allow the filter to dry for 24 hours or
more before using
※ If the pre-filter becomes damaged
or in any way needs replacement:
Please contact your local
dealer
NOTICE
English
ˍ Do not use benzene, alcohol, or other volatile fluids, which
may cause damage or discoloration.
ˍ The Pre-filter is reusable after cleaning, ensuring it is
completely dry.
ˍ Do not use hot water over 40
paint thinner.
ˍ After washing the filter, allow it to dry completely in a well
ventilated area. Otherwise, it may develop a bad odour.
o
C or volatile fluids such as
ZERO
16