Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Assembly
1. Flush through the supply pipes.
2. Mount the S - unions.
3. Fasten the mixer.
Large differences in pressure between the hot and
cold water supply should be balanced.
Operation
The mixer is actuated by pulling the lever head.
Swivel to the left = hot water,
swivel to the right = cold water.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Recommended hot water temperature: 65° C
Centre distance:
Connections G ½":
Rate of flow by 3 bars:
Hansgrohe single lever mixers can be used together
with hydraulically and thermically controlled
continuous flow heaters if the flow pressure is at
least 1.5 bars.
To adjust the hot water limiter on single lever mixers,
please see page 11.
No adjustment is necessary when using a
continuous flow water heater.
6
English
Spare parts
1
1.1 screw cover bath-mixer
2
3
4
5
6
7
8
9
max. 10 bars
1 - 5 bars
16 bars
max. 80° C
150 ± 16 mm
cold right
hot left
approx. 22l/min
handle
flange
nut
cartridge cpl.
spout cpl.
aerator cpl.
ball S - unions
escutcheon
noise reduction
94192000
94194000
92730000
92835000
13955000
94140000
94135000
6
Tabla de contenido
