Tabla de contenido
Idiomas disponibles
Idiomas disponibles
HDMI® HDB
T + 3.5
ASE
B
R
TENDER
OX
ECEIVER
F
EATURES
One-way Power over HDBaseT (PoH), so that the transmitter can be powered by receiver
•
Extend 4Kx2K at 60Hz (4:2:0) up to 130ft and 1080p at 60Hz up to 230ft with Cat 6a/7 cable
•
Extend 4Kx2K at 60Hz (4:2:0) up to 115ft and 1080p at 60Hz up to 200ft with Cat 5e/6 cable
•
HDMI 1.4 with 4K at 60Hz, 4:2:0, 8bit and HDCP 2.2 compliant
•
Supports multi-channel audio formats, including PCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos,
•
DTS-HD Master Audio and DTS:X
Audio out de-embedding, 3.5mm TRS female connectors, analog audio de-embedding of
•
HDMI output, only stereo
Audio out pass through, 3.5mm TRS female connectors, analog audio pass through from
•
transmitter to receiver, only stereo
RS232 pass through via HDBT, 3-pin 3.5mm phoenix female connector, control the transmitter
•
Supports USB 2.0 pass through over HDBT, connecting up to 4 USB devices to the receiver
•
M
B
I
OUNTING
RACKET
NSTALLATION
Note: Before installation, please ensure the unit is disconnected from the power source.
1.
Choose a suitable location for mounting bracket installation.
2.
Position and install the mounting brackets of the receiver with the two mounting screws
provided.
3.
Mount and secure the receiver to a surface or a suitable location respectively with
mounting screws.
C
I
ABLE
NSTALLATION
Note: Before installing cables, please ensure the unit is disconnected from the power source.
1.
Connect HDBT: Connect HDBT Out of the transmitter to the HDBT IN of the receiver using a Cat 5e/6/6a cable.
2.
Connect HDMI OUT: Connect an HDMI display device (e.g. TV, monitor, projector, LCD/LED display, etc.) to HDMI OUT of the receiver.
3.
Connect AUDIO OUT: Connect an amplifier to the AUDIO OUT of the receiver using a 3.5mm audio cable.
4.
Connect USB DEVICES: Connect up to four USB devices (e.g. keyboard, mouse, USB camera, etc.) to the USB DEVICE ports of the receiver.
5.
Power on all attached devices.
, USB-A,
RS232
MM
AND
- 4K 60H
Z
C
A
D
-E
OVER
AT
UDIO
E
MBEDDING
3
E
X-
P
C
ACKAGE
ONTENTS
1 x Receiver
•
1 x 3.5mm 3-Pin Phoenix connector
•
1 x 12V Power Adapter
•
2 x Mounting Bracket (with screws)
•
1 x Manual
•
(
)
US
(
)
US
Tabla de contenido
