Product Profile; Important Safety Instructions - Fellowes SB-95C Manual Del Usuario

Product Profile

This product is built to shred paper, staples, small paper clips,
credit cards, CDs, and DVDs (CDs and DVDs in designated
slot). It is not built to shred transparencies, adhesive labels,
newspaper, cardboard, large paper clips, or plastic (other than
items noted above). Attempting to shred items not intended for
this shredder may cause damage.
Sheet capacity*
CD/DVD capacity
Paper shred size
Maximum paper width
Recommended daily capacity
Maximum running time
Automatic cool-down period
Voltage
*Based on 20 lb., 8-1/2" x 11" (75 gsm) paper with shredder operating at rated voltage; heavier paper, high humidity,
or other than rated voltage may reduce sheet capacity.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING
While setting up shredder
• Check shredder for damage or defects; some paper particles in the basket are nor-
mal due to product testing and does not indicate a defect.
• If the cord is damaged do not replace cord or use the machine. Return machine for
a replacement.
• Avoid touching exposed blades on underside of confetti-cut shredder head.
• Plug power cord in an outlet that can easily be reached. The plug is the primary elec-
trical disconnect.
• Make sure the electrical rating listed on the serial label (located inside, just below top
of shredder) matches the available electric power.
• Do not place shredder near or over a heat or water source.
While operating shredder
• Keep hands and hanging objects (jewelry, ties, loose clothing,
long hair, etc.) away from paper entry.
• Keep children and pets away from the shredder.
When not in use
• Always turn off and unplug shredder.
• Unplug before emptying basket.
• Do not open shredder head: Danger of electric shock.
Opening shredder head will void the warranty.
NOTE: Do not use flammable synthetic oil, petroleum-based products
or aerosols of any kind on or near product at any time.
Confetti-cut
17 sheets
1
5/32" x 1 1/2" (3.9 x 38 mm)
9" (230 mm)
100-200 shredding passes
20 minutes
30 minutes
120V/60Hz/5.0A
3