Factory Reset - Sonoff TX Serie Manual Del Usuario

Factory Reset

Long press any button you desired to pair for about 5s until
the Wi-Fi LED indicator changes in a cycle of two short and
one long flash and release, then the reset is successful. The
device enters quick pairing mode (Touch).
Please reset the switch to factory defaults if you want to use other Wi-Fi
networks, then reconnect the network.
RF Remote Controller Pairing
The switch supports the remote controller with 433.92MHz frequency brand to turn on/off, and
each channel can learn it independently, which is local short-range wireless control not Wi-Fi
control.
Pairing Method:
Long press the touch button you want to pair until you hear a "beep" sound and release, then
press the corresponding button on the RF remote controller, and you will hear a "beep" sound
again after successful pairing. Other buttons can be paired through this method.
Clearing Method:
Long press the touch button you want to clear until you hear two "beep" sounds and release,
then press the corresponding button on the RF remote controller, and you will hear a "beep"
sound again after successful clearing. Other buttons can be cleared through this method.
SONOFF TECHNOLOGIES CO., LTD.
3
English