English
JMP battery charger
Thank you for purchasing this JMP battery charger. The operating manual is intended for the
JMP 4000, JMP 8000, JMP 15000, JMP 30000 and JMP 30000 Pro models.
Special instructions relating to the JMP 30000 Pro are contained in the back of the manual.
Please note:
The operating manual must be read before charging.
Protect the battery charger against humidity and damp.
The battery charger must be deactivated prior to connecting or disconnecting
1
the charging pliers.
2
Risk of explosion! Avoid ire, exposed light and sparks.
Warnings
•
The operating manual must be read before using the battery charger.
•
Battery acid is extremely caustic. Any acid spilt onto clothing should be washed off
immediately with lowing water. In the event of contact between acid and skin or eyes,
rinse carefully under lowing water and consult a doctor.
•
The power supply to the battery charger should be interrupted prior to connecting or
disconnecting the battery charging terminals.
•
Never charge the battery close to a naked lame or equipment which can generate
sparks. Potentially-explosive gases may escape from the battery during charging.
Effective ventilation should therefore be ensured when charging the battery in enclosed
rooms.
•
The battery charger should be positioned on a stable surface or mounted on the wall, and
effective ventilation should be ensured.
•
The battery charger should not be covered or exposed to direct sunlight.
•
Instructions provided by the battery manufacturer should be carefully observed.
•
The battery charger should only be used for the charging of rechargeable lead-acid
batteries.
•
The battery charger should not be used if cable damage is detected.
•
Repairs to the battery charger should only be realised by an authorised workshop.
56