Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6.7
In the installation area there must not be any foreign bodies and powders which could obstruct the exchanger.
6.8
The place of installation must offer adequate protection against particular atmospheric events (e.g. flooding).
6.9
The place of installation must conform to what is prescribed by local legislation.
6.10 This appliance must not be installed in a potentially explosive or acidic atmosphere or in one that is not
compatible with the materials that compose it (copper, aluminium, steel, polymers).
6.11 The ambient temperature must not be less than –25 °C or above 60 °C. In the case of installations at
temperatures lower than 5°C check that the presence of snow or ice will not obstruct the fins and will not prevent
rotation of the motors.
6.12 Before cutting of the input and/or output pipes discharge the pre-load pressure (2 bar approximately) from the
exchanger.
54
www.modine.com
1
2
Tabla de contenido
