3.
START UP
3.1. Levels
1
Check all levels of the equipment.
Hydraulic oil level, it can be checked by looking at the indicator
that is on the front side of the oil tank (under the motor). It must
be done when the tower is resting and it has to be at least ¾
of the
total.(1)
For water, oil and gas oil levels see generating set manual.
3.2. Anchorage
As described in the safety chapter, do not raise the mast before
opening the levelling feet and stabilizing the tower on a firm
2
and regular surface, in order to do so, follow the steps bellow:
- Take out the safety brackets of the pins.
(2)
- Pull out the pins vertically.
(2)
48