Masterbuilt MPC 230B Manual Del Usario página 8

CLEANING AND STORING GAS COOKER STAND
• ALWAYS MAKE SURE UNIT IS COOL TO THE TOUCH BEFORE CLEANING AND STORING.
• Simply wipe down the unit with a damp cloth after each use to keep in proper working condition.
• Do not use a cleaning agent. Make sure to dry thoroughly.
• If any rusting occurs, use steel wool to clean and buff affected area.
• The exterior of the unit may be touched up with high temperature resistant paint.
• Store only when fire is completely out and all surfaces are cold.
• Store cooker stand in covered, dry area after cleaning.
When a flame occurs inside the venturi this is caused by a blockage and could cause damage to the
hose assembly.
TO CLEAN BURNER:
1. Remove the hose from the burner using a 7/16" wrench.
2. Insert a small rod in the hole that the hose was removed from.
3. Hold the burner up to a light looking into the hole that the hose was removed from to see any obstructions.
4. If burner has not cleared, flush with water and dry completely.
5. O nce the burner has been cleared, reassemble the burner (air shutter, spring, hose).
8