General Information; Ec Declaration Of Conformity - Atlas Copco P2540 Instrucciones De Operación Y Seguridad

Ocultar thumbs

Contenido

página de 84

/ 84
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

Safety and operating instructions

4 Explosive atmosphere must not be ignited

To prevent injury and property loss from fires:

• use other technique

• use accessories of non sparking material (e.g.

needle attachment of Beryllium copper for a

needle scaler)

5 Electric chock may be fatal

• avoid chiselling into electric wiring hidden inside

walls etc.

Long term risks when using the machine

6 Always use ear protection

To prevent gradual loss of hearing due to exposure

to high noise levels:

• wear ear protection

7 Vibration may be harmful to hands and

arms

• use vibration dampened tools if available

• reduce the total time of exposure to vibrations,

particularly if the operator has to guide the chisel

by hand

8 Dust generated during operation may be

harmful

• use spot suction or a breathing apparatus

Proper use and maintenance

9 Do not perform idle blows with a hammer

• they will cause high internal stresses and shorten

the life of the tool

• note the risk of shooting out the chisel, die or

punch if the retainer is not in order

10 Quick coupling

• if a quick coupling is used on a percussive tool,

it shall be separated from the tool by a whip hose

(length 0.5 m)

11 Maintenance

Good service life and safe function is offered if the

instructions for lubrication, maintenance and over-

haul supplied with the machine are followed.

Use genuine Atlas Copco replacement kits and

parts only.

Warning

Make sure you are familiar with the operating instruc-

tions before you use this machine.

This machine, its attachments and accessories must

only be used for the purpose for which they were

designed:

General chipping, cutting and riveting work (not

for nailing without proper attachments).

For product liability and safety reasons any

modification to the machine, its attachments or ac-

cessories must be agreed in advance with an author-

ized technical representative of the manufacturer.