Troubleshooting - weBoost Home Studio Guia De Instalacion

Troubleshooting

FIXING RED LIGHT ISSUES
This involves Solid Red & Blinking Green/Red lights.
■ Tighten all cable connections (be sure to handtighten only, do NOT use tools) .
You may want to undo and redo the connection completely . Unplug and replug
in Power Supply at the wall outlet .
■ Increase the distance (horizontally or vertically) between the Outside and Inside
antenna . Add included cable if needed . Unplug and replug in Power Supply .
■ Booster should be 5 cm vertically separated and 30 .5 cm horizontally separated
from any metal .
FIXING ANY YELLOW LIGHT ISSUES
This involves Solid Yellow & Blinking Green/Yellow lights.
■ Outside Antenna must be adjusted. Disconnect and reconnect power between
adjustments . Wait at least 10 seconds between adjustments for the lights to reset .
Pole Mount Option: Rotate the Outside Antenna away from the strongest cell
phoone signal in small increments (1/8 turn) until the light turns green . Unplug and
8 ENGLISH