Protection Against Manipulation - GU BKS B-55600-13-4-6 Manual De Instrucciones

Operating instructions
B-55600-13-4-6
ekey finger scanner
3.
Your system consists of 2 electronic devices:
„ „ Fingerprint scanner
„ „ SECUREconnect 200 (control unit)
The fingerprint scanner is generally assembled externally (on the outside
of the door). To prevent unauthorised access, your system is equipped with
numerous security functions:
„ „ The fingerprint scanner is connected to the control unit using a data
cable. Data transmission is encrypted.
„ „ Recording of the user finger and the modification of the system content
is only possible if master finger has already been recognised by the
system.
„ „ The fingerprint scanner and control unit are clearly paired for initial
commissioning (pairing).
In order to exchange a component of the door system (SECUREconnect
200R, SECUREconnect 200F or fingerprint scanner), you have to start a
re-pairing procedure. To do so, close the reset contact on the board of the
SECUREconnect 200F or SECUREconnect 200R for a minimum of 3 seconds
with the power supply connected. We recommend to use an alligator clip.
The terminal can be removed. The pairing process for the SECUREconnect
200R, SECUREconnect 200F and fingerprint scanner now restarts. The
fingerprint scanner is reset to the factory setting.
EN
32

Protection against manipulation

10.2018 | 20525E | Designed in Germany