Stihl FS 460 C-M Manual De Instrucciones página 25

Attaching circular saw blades
With circular saw blades, the cutting
edges must face clockwise.
For attaching circular saw blades, a limit
stop set is available as a special
accessory that contains a limit stop and
a guard ring for circular saw blades.
Change guard ring
3
4
5
N Remove guard washer (3) and
thrust plate (4)
N Remove guard ring (5) for mowing
tools
FS 460 C-M, FS 460 C-M L
4
6
N Attach guard ring (6) for circular saw
blades
N Push thrust plate (4) onto the shaft
N Attach limit stop (7) for circular saw
blades
Do not use the guard washer (3)
for circular saw blades.
Mounting the cutting attachment
4
3
2
b
a
N Position cutting attachment (1)
The collar (a) must engage the
hole (b) in the cutting attachment!
N
Fit the thrust washer (2) – curvature
faces upward
N Position thrust plate (3)
7
A thrust plate (3) for sawing use, with
which the entire cutting depth of the
circular saw blade can be used, is
available as a special accessory.
N Block the shaft
N Screw on the nut (4)
counterclockwise and tighten
Remove the tool used to block the
shaft.
Removing cutting attachments
N Block the shaft
N
Unscrew the nut clockwise
A nut that moves too easily should
be replaced.
1
English
23