Enter New Net Id In Configurator; Terminal Attempts To Associate With Access Point - Symbol VRC 394 Serie Guía Rápida

Enter New Net ID in Configurator

On first boot (out of the box), the terminal automatically brings
up the Configurator screen for entering a new Net ID:
CONFIGURATOR 1.XX
View config params
Net Id
Subnet Mask
Default Router
Terminal IP Address
Exit
↑
, Clear, Enter
To enter a new Net ID (obtained from the network
administrator):
1. Use the UpArrow and DownArrow to cursor to Net ID.
2. The default Net ID appears in hex format. Backspace over
the existing value, type a new value in the range 102-1FE
(in hex, not case sensitive), and press ENTER.
3. Power the terminal off.
4. Cold boot the terminal again.

Terminal Attempts to Associate with Access Point

The terminal attempts to associate with an Access Point (AP)
using the default Net ID.
If Terminal Association with AP Is Not Successful
If the terminal is unable to associate with the AP (the Net ID
is wrong or forgotten), it displays the message:
STAT24 Ver 1.XX
NOT Associated
5