Attaching A Scanner; Using The Scanner - Symbol VRC 394 Serie Guía Rápida

10

Attaching a Scanner

1. Ensure the terminal is off.
2. Connect the DB-9 connector on the scanner to the DB-9
plug on the bottom of the terminal.
3. Press ON/OFF to power the terminal back on.

Using the Scanner

To use the attached laser scanner:
1. Pull the scanner trigger to power on the scanner.
2. Aim the laser scanner at the bar code. Position the red
laser beam to cover the entire bar code.
Note: Do not position the scanner exactly perpendicular to
the bar code being scanned. In this position, light can
bounce back into the scanner's exit window, and
possibly prevent a successful decode.
Quick Reference