Declaration Of Conformity - Extremis Sticks Manual Del Usuario

sticks
sticks enlightened
OUTDOOR RUBBER BASE

DECLARATION OF CONFORMITY:

DECLARATION OF CONFORMITY:
This product meets the This product meets the
requirements of European requirements of European
Directives 2006/95/EC and 2004/108/EC. Directives 2006/95/EC and 2004/108/EC.
Specifications OUTDOOR Specifications OUTDOOR
° model: SB6030ROL ° model: SB6030ROL
° 100-240 V ~ 50/60 Hz ° 100-240 V ~ 50/60 Hz
° max. 20 x 2.4 W ° max. 20 x 2.4 W
° type of light bulb: 2 x LED light bulb ° type of light bulb: 2 x LED light bulb
Sticks Sticks
° IP 65 ° IP 65
The supplied plug (part of SLSO) is a The supplied plug (part of SLSO) is a
Europlug (Type E). In countries where this Europlug (Type E). In countries where this
type of plug is not used, please provide a type of plug is not used, please provide a
suitable plug yourself! suitable plug yourself!
The assembly and the replacement of the The assembly and the replacement of the
LED light bulbs may only be carried out LED light bulbs may only be carried out
by a qualified electrician. Extremis shall by a qualified electrician. Extremis shall
not be liable in any way for any damage not be liable in any way for any damage
caused by incorrect assembly, improper or caused by incorrect assembly, improper or
unforeseeable use, taking account of all the unforeseeable use, taking account of all the
specifications and instructions contained in specifications and instructions contained in
this manual. this manual.
contents outdoor version
° base x ... (1-20 pieces): LED illuminated
base, fully assembled
° SLS x 1: cable with plug and cap
° rods x ... (1-20 sets): fibreglass rods
assembly
By each time connecting the base's fitted cable to the following base's cable you can make
a row of up to 20 Sticks Enlightened bases. The first base's cable must in this case be
connected to the cable with the plug (SLSO).
1. Position the bases at the desired spot.
3. Put the cap over the female plug of the
last base.
5. Click the cable with the plug into the
male plug of the first base.
2. Connect them by clicking the male plug
into the female plug.
4. Fit the plug to the cable (this operation
must be carried out by a qualified
electrician).
6. Connect Sticks to the electricity network.
www.extremis.be