Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
Lamp
Replacement
1.
Turn the fixture off and disconnect it from power.
2.
Wait at least 15 minutes for the lamp to cool down.
3.
Remove back cover using the 2 Phillips-head ¼-turn screws.
4.
Orient the rear of the product so that the fan is facing downward.
5.
Using the lamp base, push the lamp down against the spring clips
located on the bottom, and then roll the lamp out the top.
6.
Remove the 2 wires connected to the lamp by the spade connectors.
7.
Reverse steps 3 thru 6 above to install the new lamp.
Please refer to the User Manual for more detailed instructions with images.
Lamp
Legend™ 330SR Spot QRG
3
¼-turn
Phillips-head
Screws
Spade
Connectors
Spring
Clips
Tabla de contenido
