7.4 Disposal of the fi lter cartridge
ATTENTION
YOU SHALL ALWAYS CHECK THE RIGHT POSITIONING AND TIGHTENING OF
THE FILTER CARTRIDGE. A WRONG POSITIONING OR A LOOSE FILTER
CARTRIDGE MAY CAUSE A SERIOUS DAMAGE OF THE PRODUCT.
DO NOT USE THE VACUUM CLEANER WITHOUT THE FILTER CARTRIDGE.
ENSURE YOU HAVE REPLACED A SPARE FILTER CARTRIDGE BEFORE
CARRYING OUT THIS OPERATION.
The fi lter cartridge can be reused after washing under running water.
ATTENTION: before replacing the fi lter cartridge back in the system after washing, ensure it has
completely dried. DO NOT reassemble the fi lter cartridge if the surface is still wet or damp.
Before washing the cartridge it is always
recommended to vacuum clean the dirty
surface with an auxiliary suction cleaner
or with the utility/service inlet, remembering
8 - REPAIRS AND SPARE PARTS
8.1 Intervention criteria
Any intervention on the vacuum cleaner for repairs and/or maintenance which are not expressly authorized
in this manual is absolutely forbidden.
Any repair for breakage or malfunctioning must be carried out by qualifi ed Technical Assistance personnel.
Any intervention of non-authorized personnel will result in the invalidation of any guarantee of the product
and the manufacturer will not be held responsible for any eventual damage to persons and/or objects due
to such interventions.
13.10.2020 Rev:1.0.0
to insert a spare cartridge in the
system before use.
1
Check the fi lter surface is not cut. If this
2
is the case, the cartridge should not be
used again and should be defi nitely replaced.
2
15