Ip Protection Degree; Electrical Insulation Degree; Declaration Of Absence Of Dangerous Substances; Fixed Closure Guards Safety - Variovac S18 Manual Tecnico

Finally, remind that pictograms or danger and warning signals can be found on those parts of the equip-
ment where, if not strictly followed, potential risky situations may occur.

4.2 IP Protection Degree

IP 44: The appliance features a protection against solid objects having a size exceeding 1
IP 44
mm and protection against splashes of water (splashes of water from any direction on the
cover must not produce dangerous effects).

4.3 Electrical insulation degree

CLASS I: the appliance features basic electrical insulation.
Must be connected to the ground circuit through the main electric circuit.
CLASS II: the appliance features double electrical insulation. They doesn't need a connetion
to the ground circuit through the main electric circuit.

4.4 Declaration of absence of dangerous substances

The constructor declares that its products and appliances have been manufactured with materials which
comply with the restrictions established by the health and environment protection regulations in force
and do not contain SVHC-classifi ed substances (Substance of Very High Concern) in compliance
with CE regulation 1907/2006 (REACH: i.e. Registration, Evaluation, Authorization and Restriction of
Chemical Substances). Although these substances have not been used during the processing cycles of
raw materials and during the manufacturing cycles of our products, their presence in p.p.m. (parts per
million) cannot be completely excluded due to micro-pollution of raw materials.

4.5 Fixed closure guards safety

The vacuum cleaner is delivered to the Customer with its main body completely assembled. Moving
parts (suction motor turbine blades) are protected by a protection grid directly assembled on the inlet of
the suction motor compartment. This protection grid cannot be accessed by the operator. The operator
also does not have access to the electrically-operated parts of the appliance which are protected by a
cover which can only be removed by unscrewing the Torsen screws used to fi x the soundproofi ng dome
of the housing where the suction motors are assembled.
Every intervention on the control board and on the motors must be carried out by qualifi ed personnel
only after disconnecting the electrical power supply and by removing the electric plug from the electric
socket.

4.6 Movable closure guards safety

There are no movable closure guards assembled on the appliance. Every guard assembled is consid-
ered a fi xed guard and is fastened with special screws. the constructor reminds you that it is absolutely
forbidden to replace the screws used for the design and manufacture the appliances with screws that
feature different characteristics.
The constructor will immediately suspend the product guarantee in case of machine tampering carried
out by the Customer.
13.10.2020 Rev:1.0.0
2
7