Safety; General Regulations - Rendamax R3 EVO Serie Manual De Uso E Instalación

Safety

General regulations

General regulations
This documentation contains important
information, which is a base for safe
and reliable installation, commissioning
and operation of the R3XXX EVO boiler.
All activities described in this document
may only be excecuted by authorized
companies.
Changes to this document may be
effected without prior notice. We accept
no obligation to adapt previously
delivered products to incorporate such
changes.
Only original spare parts may be used
when replacing components on the
boiler, otherwise warranty will be void.
Application
The R3XXX EVO boiler may be used
for heating and hot water production
purposes only. The boiler should be
connected to closed systems with a
maximum temperature of 100ºC (high
limit temperature), maximum setpoint
temperature is 90ºC.
Norms and regulations
When installing and operating the boiler,
all applicable norms (european and
local) should be fulfilled:
• Local building regulations for
installing combustion air and flue
gas systems;
• Regulation for connecting the boiler
to the electrical appliance;
• Regulations for connecting the
boiler to the local gas network;
• Norms and regulations according
to safety equipment for heating
systems;
• Any additional local laws/
regulations with regard to installing
and operating heating systems.
6
This boiler is CE approved and
applies to the following Following
international / European norms:
• 2016/426/EEC Gas appliances
regulation.
• 1992/42/EEC Efficiency directive.
• 2014/30/EU EMC directive.
• 2014/35/EU Low voltage directive.
• EN 15502-1 Gas-fired central
heating boilers - Part 1: General
requirements and tests.
• EN 15502-2-1 (Gas-fired central
heating boilers - Part 2-1: Specific
standard for type C appliances and
type B2, B3 and B5 appliances of
a nominal heat input not exceeding
1000 kW).
• EN 55014-1 Electromagnetic
compatibility - Requirements for
household appliances, electric
tools and similar apparatus - Part 1:
Emission.
• EN 55014-2 Electromagnetic
compatibility - Requirements for
household appliances, electric
tools and similar apparatus - Part 2:
Immunity - Product family standard.
• EN 61000-3-2 Electromagnetic
compatibility (EMC) - Part 3-2:
Limits - Limits for harmonic current
emissions (equipment input current
16 A per phase).
• EN 61000-3-3 Electromagnetic
compatibility (EMC) - Part 3-3:
Limitation of voltage changes,
voltage fluctuations and flicker in
public low-voltage supply systems,
for equipment with rated current
16 A per phase and not subject to
conditional connection.
• EN 60335-1 Household and similar
electrical appliances - Safety - Part
1: General requirements.
• EN 60335-2-102 Household and
similar appliances - Safety - Part
2-102: Particular requirements
for gas, oil and solid-fuel
burning appliances having
electricalconnections.
• EN 50165 Electrical equipment
of non-electric appliances for
household and similar purposes.
Safety requirements.
• EN 12828 / DIN 4751-2 Heating
systems in buildings - Design for
water-based heating systems /
Medium temperature hot water
systems (mthws) with a boiler
flow temperature up to 120 °C -
specification for sealed systems
using thermostatic control - safety
equipment.
Additional national standards
Switzerland:
SVGW
Germany:
RAL - UZ 61 / DIN 4702-8,
Energieeinsparverordnung (EnEV DIN
4701-10), BimSchV
Austria:
Kurzgutachten 15a V-BG
Belgium:
NOx certification
France:
Arrête du 02 Aout 1977 - 300mbar gas
pressure with Accessory kit.
Italy:
Italy: Star level certification
"Legge 10" 1991