System Icon Definition; Quick Setup Your Device - Furrion Access FAN17B83 Manual De Instrucciones

Device Configuration

System Icon Definition

Reboot the system.
Click to logout of the
system.
Click for quick setup of
your system.
Indicates the signal
strength.

Quick Setup your Device

Change Administration Password
After a successful login, the following
screen will appear and you will be
required to setup a new password
for the "admin" account for device
management.
Advance Setting
OFF
Quick Setup - User Settings
Username
New Password
Confirm Password
Exit
Username: Show the current username.
New Password: You can enter 1-32
characters as your new password.
Confirm Password: Enter the new
password again.
Click Next to go on to the next step.
WAN Connection Setup
Select WiFi, in order to access the
Furrion network activation. The
following screen will appear after
9
admin
(1~32)
(1~32)
Next
clicking the Next button and will allow
you to configure the WiFi settings.
Dashboard WAN Status LAN
Advance Setting
ON
Quick Setup - WAN Settings
WAN Interface
Back
LTE: For internet service through the
LTE network.
Ext WiFi: For internet service through
the public WiFi network.
Click Next to go on to the next step.
Wireless Connection Setup
The following screen will appear after
clicking the Next button and will allow
you to configure the WiFi settings.
Quick Setup - Wireless Settings
Setting All
ON
2.4/5G WiFi
Network Name (SSID)
Security Mode
WPA Algorithms
Password
Back
Network Name (SSID): To identify your
wireless network, a network name called
SSID (Service Set Identifier) is used. You
can change to any name you preferred.
NOTE: Make sure that your SSID is
unique if there are other wireless
networks operating in your area.
Security Mode: Select a mode of
Disabled, WPA-PSK, WPA2-PSK or WPA-
PSK/WPA2-PSK
WPA Algorithms: TKIP, AES
WIFI Firewall System Management
LTE
Ext Wifi
Next
FURRIONAP_640A83
WPA-PSK/WPA2-PSK
TKIP AES
FA640A83
Next