Agitator Assembly; Removing Clogs - Panasonic QUICKDRAW MC-V5267 Instrucciones De Operación

Tabla de contenido
Agitator Shaft
Filter
Agitator Pulley
Hose
Manguera
Tuyau
Cover (Suction Inlet)
Cubierta
(Abertura de aspiración)
Couvercle
(Entrée d'aspiration)
Short Hose
Manguera corta
Tuyau court
+
Hose Fitting
Conexión para manguera
Raccord du tuyau

Agitator Assembly

Agitator
Body
End Caps

Removing Clogs

Short Hose
Manguera corta
Tuyau court
- 36 -
Brush
Agitator Holder
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
Unplug vacuum.
Pull open suction inlet cover and
check for clogging.
Disconnect wand from short hose
and check wand and hose.
Plug in vacuum cleaner and turn on.
Disconnect wand and stretch hose in
and out to remove clog.
If clog still exists, turn vacuum
cleaner OFF and UNPLUG POWER
CORD.
Remove lower plate.
Remove short hose from nozzle by
lifting straight up.
Inspect hose end and clear any
obstructions.
Reinstall short hose and lower plate.
Filter
E- Clip
Tabla de contenido
loading

Tabla de contenido