Switching On/Off; Troubleshooting Guide - Bontempi iGirl 40 1320 Libro De Instrucciones

SWITCHING ON/OFF

1. Turn on the instrument by
moving the switch placed
behind the module to the ON
position.
To switch the instrument off
move the same selector to OFF.
N.B. Switch the instrument off if
it is not used, to prevent use of
the batteries.
2. Move the microphone slider to
the ON position.
CAUTION!
To avoid 'feed back' please place
the microphone as far from the
speaker as possible.
HOW TO SING ALONG
THE MUSIC
With the provided cable (H) you can
connect an external audio source
(MP3 player, iPad, smartphone, etc., not supplied) to the stage microphone.
1. Insert the cable into the MUSIC IN socket.
2. Insert the other end of the cable into the "HEADPHONE" socket of your music player or other
audio source.
3. Turn on the player, or other music sources and adjust the volume to balance the voice with
the music; the reproduction will be monophonic because of the instrument.
TROUBLE SHOOTING GUIDE
Problem
The instrument doesn't work or
distorted sound.
Microphone doesn't work
If there is an irritating whistling sound
No sound can be heard from the
external music source
ATTENTION: in the case of malfunctioning remove and re-insert the batteries
4
MUSIC IN
not included
Solution
Batteries low – fit new batteries.
Batteries incorrectly fitted – check.
Check that the jack-pin is inserted and turn
microphone switch to ON.
Move the microphone away from the loudspeaker.
Check that the jack has been inserted.
Check that the volume of the external musical
R6/AA 1.5V R6/AA 1.5V
R6/AA 1.5V R6/AA 1.5V
R6/AA 1.5V R6/AA 1.5V
ON OFF MIC On