Optional Brace Strap; Proper Care And Maintenence; In The Event Of A Crash; Technical Information - Leatt-Brace Neck Brace 4.5 Manual Del Usuario

4.5 | 5.5 | 6.5

Optional Brace Strap

17
a.
c.
e.
Front
The brace strap is easily attached through opening the ends of the straps (17 a & b), looping them through
the strap openings and then closing them again (17.c & d). Please make sure you have the straps secure on
the front and back of the brace(17.e).
10
b.
d.
Back
®
Copyright © 2016, Leatt Corporation
4.5 | 5.5 | 6.5
Proper care and Maintenance
Make it a habit to inspect your Leatt-Brace ® as you would other safety equipment. Frequently worn braces
should be discarded and replaced every two years.
Do not make any alterations or modifications to your Leatt-Brace ® . If you lose or damage adjustment pins,
hinges, struts, padding, or other components, purchase replacements from Leatt Corporation.
Keep your Leatt-Brace ® clean by washing it with plain soap and water. Solvents, abrasive cleaners, and
high heat can damage the brace and reduce its effectiveness just when you need it the most.

In the event of a crash

1. The Leatt-Brace ® is designed to absorb potentially injurious forces and redistribute them using
Alternate Load Path Technology ® Although components of the Leatt-Brace ® may feel rigid to the
touch, the front and rear platforms and thoracic struts are engineered to yield under load.
2. The Leatt ® Corporation would like to hear from you if you have been involved in a crash event. The
feedback is used to advance the understanding of crash dynamics in the Leatt ® Lab and assist in
improving our products.
3. In event of a crash, if you have supporting footage, photos or medical information, gather all the
supporting information and submit it to the address below.
4. After evaluation by the Leatt ® Lab and subject to the Leatt ® Lab discretion incentives may be offered
for fully completed Injury Assessment forms;
You can fill in our online injury assesment form at: www.leatt.com/customer-support/accident-form/

Technical information

Leatt ® 4.5 / 5.5 / 6.5 has been tested against the manufacturer's specifications and EC Type-Examination
certification has been issued by RICOTEST Via Tione, 9 - 37010 Pastrengo (VR) Italy, Notified Body No. 0498. It
is CE marked to denote compliance with the EU Personal Protective Equipment Regulation 2016/425.

LIMITED WARRANTY

YOUR LEATT-BRACE® IS WARRANTED TO BE FREE OF DEFECTS IN MATERIALS OR MANUFACTURING FOR
ONE YEAR FROM THE DATE OF PURCHASE. THE LEATT-BRACE® IS DESIGNED TO YIELD OR BREAK UNDER
CERTAIN CONDITIONS OF USE, SO DAMAGE CAUSED BY ACCIDENTS, FALLS, ABUSE OR MISUSE IS NOT
COVERED BY THIS LIMITED WARRANTY.
TO MAKE A WARRANTY CLAIM, GO TO WWW.LEATT.COM OR SEND AN EMAIL TO WARRANTY@LEATT.
COM.
LEATT CORPORATION EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
®
Copyright © 2016, Leatt Corporation
GB
11