Top Panel Features - Numark ARC3 Manual De Inicio Rápido

TOP PANEL FEATURES

1. PLAY/STUTTER – Starts the music from
the initial cue point.
2. PAUSE – Pauses the music.
3. CUE – Returns and pauses the music at
the last set cue point.
where the music will begin when play is
pressed. The cue point is the beginning of
a track or can be set when play is started
after the music is paused. For instance if
the music is paused then PLAY is pressed,
a new cue point is set. You can easily edit
the cue point by turning the wheel during
pause. As you rotate the wheel the music
will sound. By stopping the wheel and
pressing play
Alternately pressing the PLAY button and
the CUE button allows the CD to be played
from the same position any number of
times.
Note: Pressing cue 2 times plays music
temporarily from this point until the button is
released.
4. JOG WHEEL –
Cue Function: As explained under
"CUE", when the music is paused and
you rotate the wheel, music will sound.
By pressing play a new cue point is set.
Search Function: As explained under
"TRACK SELECT/SEARCH",
search is pressed and you rotate the
wheel, the music will rapidly scan the
music to find a cue point.
Pitch Bend Function: Allows the user
to temporarily change the speed of the
music to align beats. When the beats of
the music of the CD you wish to match is
fast compared to the tempo of the other music rotate the jog wheel counter clockwise (to the left).
When the CD is behind rotate the jog wheel clockwise (to the right). The pitch changes temporarily
while the jog wheel is rotated.
Releasing the wheel results in a return to the original pitch.
Scratch Function: As explained under "SCRATCH," while activated, jogging the wheel creates a
"scratch" effect.
5. LCD DISPLAY – Indicates all the functions, as they are occurring, with the CD.
6. OPEN/CLOSE – Pressing will open or close the disc tray on the transport.
7. SGL – To set play mode in single or continuous play.
8. TIME – Controls display indication of time mode.
9. PROGRAM – Depress this button and the unit will stop and the program indicator will light. Select each
track to be programmed and press the PROGRAM button between selections. You can program up to
21 tracks. Press PLAY to start the program. To exit and erase program, either hold the program button
down for more than 2 seconds while the unit is stopped, open the disc tray, or turn off the power.
10. TRACK SELECT/SEARCH –
Rotation – selects tracks
Pressing while rotating – selects tracks +10
Pressing once- Puts wheel in search mode.
The cue point is
a new point is
when
The faster you rotate the wheel the more pitch is changed.
set.
2