Operation; Using The Battery As A Power Bank - Workzone 869 Manual Del Usuario

Operation

The light cannot be used during the charging process.
The light provides three levels of brightness (100%, 50%, and 25%).
1. To find out the battery's charging level, press the Battery level indicator button
4 to view the battery level indicator (see Fig. B).
If the battery is fully charged, all four lights on the battery level indicator
green. The lower the charging level, the lower the number of lit lights. Each light
represents 25% of the battery charge. The operating time on a fully charged battery
is approx. 2 hours.
2. Using the handle
3. To set up the light, unfold the handle in such a way that the light hits the area of
use at the desired angle.
4. To switch on the light, press the on/off switch
The LED shines at 100% brightness level.
5. To reduce the brightness, press the on/off switch very lightly.
The LED shines at 50% brightness level.
6. To further reduce the brightness, press the on/off switch very lightly once again.
The LED shines at 25% brightness level.
7. Press the on/off switch a third time to switch off the light.

Using the battery as a power bank

− Connect the device you would like to charge to the light via a USB charging cable
(not included) by plugging the USB connector into the USB port
1 , carry the light to the desired location of use.
(see Fig. B).
8
Operation
3 shine
(see Fig. B).
6
13