Resetting To The Factory Default Settings; Further Information - Axis Communications 210 Guia De Instalacion

Page 10

Resetting to the Factory Default Settings

This will reset all parameters, including the IP address, to the Factory Default settings:
1. Disconnect power from the camera.
2. Press and hold the Control button (on the underside of the camera) and reconnect power.
3. Keep the button pressed until the Status Indicator displays yellow (this may take up to 15
seconds), then release the button.
4. When the Status indicator displays green (which can take up to 1 minute) the camera is
reset to the factory default settings.
5. Re-install the AXIS 211/211A using one of the methods described in this document.

Further information

For further information, please see the AXIS 210/210A/211/211A User's Manual, which is
available on the CD included in this package. Updated versions can be obtained from
www.axis.com
AXIS 210/210A/211/211A Installation Guide