Sage the Nutri Juicer BJE410 Guía Rápida página 6

ASSEMBLY
BEFORE FIRST USE
Before using your juicer for the first time, remove
and safely discard any packaging materials and
promotional stickers and labels.
Ensure the appliance is switched off at the power
outlet and the power cord is unplugged.
Wash the filter bowl surround, filter basket,
juicer cover, food pusher, pulp container and
juice jug and lid in warm, soapy water with a soft
cloth. Rinse and dry thoroughly. The motor base
can be wiped with a damp cloth. Dry thoroughly.
1. Place motor base on a flat, dry surface
such as a bench top. Ensure that the
motor base is switched OFF at the
control panel, then switch the appliance
off at the power outlet and unplug the
power cord.
2. Place filter bowl surround on top of the
motor base.
6
3. Align the arrows at the base of the
stainless steel filter basket with the
arrows on the motor drive coupling
and push down until it clicks into place.
Ensure the stainless steel filter basket
is fitted securely inside the filter bowl
surround and onto the motor base.
4. Place the juicer cover over the filter bowl
surround, positioning the feed chute over
the stainless steel filter basket and lower
into position.
5. Raise the safety locking arm up and
locate into the two grooves on either side
of the juice cover.