Packaging, Shipping And Complaint; Warranty And Products Return; Maintenance And Disclaimer; Power Supply - Proel Technology WM600D Manual De Usuario


The product has fallen and been damaged.

The product does not appear to operate normally or exhibits a marked change in performance.
Do not operate on the product, it has no user‐serviceable parts inside.
Refer servicing to an authorized maintenance centre.
PACKAGING, SHIPPING AND COMPLAINT
This unit package has been submitted to ISTA 1A integrity tests. We suggest you control the unit
conditions immediately after unpacking it.
If any damage is found, immediately advise the dealer. Keep all unit packaging parts to allow inspection.
Proel is not responsible for any damage that occurs during shipment..
Products are sold "delivered ex warehouse" and shipment is at charge and risk of the buyer.
Possible damages to unit should be immediately notified to forwarder. Each complaint for manumitted
package should be done within eight days from product receipt.
WARRANTY AND PRODUCTS RETURN
Proel products have operating warranty and comply their specifications, as stated by manufacturer..
Proel warrants all materials, workmanship and proper operation of this product for a period of two years
from the original date of purchase. If any defects are found in the materials or workmanship or if the
product fails to function properly during the applicable warranty period, the owner should inform about
these defects the dealer or the distributor, providing receipt or invoice of date of purchase and defect
detailed description. This warranty does not extend to damage resulting from improper installation,
misuse, neglect or abuse. Proel S.p.A. will verify damage on returned units, and when the unit has been
properly used and warranty is still valid, then the unit will be replaced or repaired. Proel S.p.A. is not
responsible for any "direct damage" or "indirect damage" caused by product defectiveness.
MAINTENANCE AND DISCLAIMER
Clean only with dry cloth.
Proel products have been expressly designed for audio application, with signals in audio range (20Hz to
20kHz). Proel has no liability for damages caused in case of lack of maintenance, modifications, improper
use or improper installation non‐applying safety instructions.
Proel S.p.A. reserves the right to change these specifications at any time without notice..
Proel S.p.A. declines any liability for damages to objects or persons caused by lacks of maintenance,
improper use, installation not performed with safety precautions and at the state of the art.
POWER SUPPLY
This apparatus should only be connected to power source type specified in this owner's manual or on the
unit.
If the supplied AC power cable plug is different from the wall socket, please contact an electrician to
change the AC power plug.
Hold the plug and the wall outlet while disconnecting the unit from AC power.
If the unit will not be used for a long period of time, please unplug the power cord from AC power outlet.
To avoid unit power cord damage, please do not strain the AC power cable and do not bundle it.
In order to avoid unit power cord damage, please ensure that the power cord is not stepped on or
pinched by heavy objects.
USER'S WARNINGS AND CE CONFORMITY
LICENSING INFORMATION: This radio equipment operates in the 863‐865 MHz harmonized European
4