Add Device - Viesta VAC-09CH Manual De Instrucciones Y De Instalación

KEN002VAC
EN
v1• 11.11.2020

ADD DEVICE

There are 2 modes CF (Quick connection) and AP(Access Point) for adding device.
CF mode
1. Power on the indoor unit, no need to launch the air conditioner.
2. Click „+" in the upper right corner of the „Home" screen or tap „Add device" on the room which has no device.
3. Tap the „Split Air conditioner" logo.
4. Reset the Wi-Fi module by pressing the „DISPLAY" on the remote controller 6 times , or use a suitable tool
to press the reset button on the Wi-Fi module, until it shows „CF" on the indoor display, then tap"Next Step".
5. Input the password of the Wi-Fi which the same as your smart phone connected, tap „Confirm"(You can
change network if needed).
6. You can see the percent rate of connecting process, at the same time PP","SA","AP" shining in turn on the
indoor display.
„PP" means „Searching the router"
„SA" means „connected to the router"
„AP" means „connected to the server"
45