Connecting To A Bluetooth Device - Elari NanoPods Manual De Instrucciones

2. Getting started: pairing the earphones
with each other
The earphones are two separate Bluetooth-devices which need
to be paired to each other before connecting them to your smart-
phone, tablet, laptop, etc. This needs to be done once, and after
the initial connection, they will pair to each other and connect
to the Bluetooth device automatically when you power them on.
To pair the earphones to each other please follow the instruction
below:
2.1. Take the left (L) and the right (R) earphones in the off
state (indicators not blinking).
2.2. Press and hold power keys of both earphones until you
hear first "Power on" and then "NanoPods pairing" voice mes-
sages. The indicators of both earphones will start blinking
red and white.
To accelerate the pairing process, bring the headphones
closer to each other.
Left (L) Right (R)
6
2.3. Now the earphones will connect to each other and indi-
cators will start blinking white only. In the earphones you will
hear "NanoPods connected" voice message.
2.4. Then you will hear the voice messages: "Right chan-
nel" and "Left channel". Now the earphones are successfully
paired to each other and ready to be connected to your Blue-
tooth device, and the right earphone will start blinking red
and white.

3. Connecting to a Bluetooth device

3.1. Turn on Bluetooth on your device.
3.2. Open Bluetooth settings and search for new devices.
3.3. Choose "Elari NanoPods-R" from the list of Bluetooth
devices.
3.4. Complete the connection.
3.5. You will hear "Music source connected" voice message in
the earphones.
NOTE: DURING PHONE CALLS OR OTHER USE OF THE EAR-
PHONES AS HEADSET FOR VOICE CONVERSATION, THE
SOUND IS ONLY IN THE RIGHT EARPHONE, NOT BOTH (you
can also choose and connect the left earphone if you prefer
that by pairing it separately in mono mode).
Earphones support devices with Bluetooth versions
V2.1+EDR and above.
7