Festo SPC200 Manual Del Usario página 14

2 Fitting and removing modules
Warning
Modules may be damaged if they are not handled
correctly.
S Do not therefore touch any components.
S Observe the regulations for handling electrostatically
sensitive components.
S In order to protect the modules against discharges of
static electricity: discharge yourself electrostatically
before fitting or removing modules.
The field bus module can be fitted as desired into slots 2
to 6. If the field bus module is fitted next to the diagnostic
module, it will not be possible to connect a control panel
whilst the field bus cable is plugged in. Only one field bus
module may be fitted. All the I/Os of the I/O modules
fitted are freely programmable.
Removing modules
1. Switch off the compressed air supply and the operat
ing voltage supply.
2. Loosen and pull off the connecting cable on the front
of the module.
3. Unlock both retaining levers by pushing them back
(see following diagram).
14 Festo SPC200−COM−PDP 0302a English