Philips AZ 2785 Manual Del Usuario página 16

RECORDING
Dubbing: Copying from deck 2 to 1
For best results, use mains power or fresh batteries.
1. Select TAPE source.
2. Press both STOP•EJECT 9/ keys and insert a recorded tape
into deck 2 and a suitable tape for recording in deck 1.
3. Press PAUSE ; on deck 1 and then RECORD 0.
4. To start dubbing, press PLAY 2 on deck 2. PAUSE ; on
deck 1 is then released.
– By pressing PAUSE ; on deck 1, you can omit undesired
passages while deck 2 continues. Press deck 1 PAUSE ; to
resume dubbing.
– Pressing PAUSE ; on deck 2 will create pauses.
5. To stop recording, press both STOP•EJECT 9/ keys.
SYNCHRO START CD RECORDING
1. Select CD source.
2. Insert a CD and if desired, program track numbers.
3. Press STOP•EJECT 9/ to open the cassette holder. Insert a
blank tape.
4. Press the cassette holder shut.
5. Press RECORD 0 to start recording.
– Playing of the CD program starts automatically from the
beginning of the program. It is not necessary to start the CD
player separately.
6. For brief interruptions press PAUSE ;. To resume recording,
press PAUSE ; again.
7. To stop recording, press STOP•EJECT 9/.
To select and record a particular passage
During CD playback, press and hold down the SEARCH ¡ or ™ on
the set to find your passage.
• Press PLAY/PAUSE 2; to put the CD player on pause at the
selected passage.
– Recording will begin from this exact point in the track when
you press RECORD 0.
Recording from the radio
1. Select TUNER mode and BAND.
2. Tune to the desired radio station (See TUNING TO RADIO
STATIONS).
3. Press STOP•EJECT 9/ of deck 1 to open the cassette
holder and insert a blank tape.
4. Press the cassette holder shut.
5. Press RECORD 0 to start recording.
6. For brief interruptions, press PAUSE ;. To resume recording,
press PAUSE ; again.
7. To stop recording, press STOP•EJECT 9/.
16
CD
TU NE R
TA PE
PR OG
ST OP
SE AR CH
PL AY /PA US E
BA N
CD
TU NE R
TA PE
PR OG
ST OP
SE AR CH
PL AY /PA US E
B
CD
TU NE R
TA PE
PR OG
ST OP
SE AR CH
PL AY /PA US E
BA N