THERMEx Le Mans II Instrucciones De Montaje página 77

M 525051003201022021 THERMEX LE MANS II 77
Before fixing the induction hob, glue the foam gasket included, on the underside of the glass.
Caution! It is forbidden to install the hob without the foam gasket!
Remove the protective film and glue the gasket at 2mm distance from the glass edge
(A=2mm), the gasket must be attached along the entire length and should not overlap at
the corners (Fig.3.10).
Fig. 3.11
Fig. 3. 10
Lay in the silicone sealant flush at the hole (Fig. 3.11), place the induction hob (Fig.3.12)
Fig. 3.12