Use The Seam Guide; Turning A Square Corner; Variable Needle Position - Baby Lock Joy BL25B Instruccion Y Quia De Referencia

w
e
q
q

Use the Seam Guide

The seam guides on the needle plate help you to
measure seam width.
The numbers indicate the distance between the center
needle position and the guide line.
Numbers on the
10 15 30 40 3/8 1/2 5/8 1
needle plate
Distance in
1.0 1.5 3.0 4.0 — — — —
centimeters
Distance in
— — — — 3/8 1/2 5/8 1
inches
q Seam guides
w Center needle position
e Distance between the center needle position and
the guide line

Turning a Square Corner

The cornering guide helps you maintain a 5/8˝ (1.6 cm)
seam allowance when sewing a corner.
When the fabric edge facing you lines up with the
cornering guide as illustrated, stop stitching and lower the
needle into the fabric by turning the handwheel toward
you.
Raise the presser foot and pivot the fabric so the edge of
the fabric will align with the 5/8˝ (1.6 cm) seam guide.
Lower the presser foot and start stitching in the new
direction.
q Cornering guide

Variable Needle Position

When the straight stitch (pattern A) is selected, you can
move the needle between center and left needle position
by turning the stitch width dial.
36
1 1/2
—
1 1/2