Sanus VF2012 Manual De Instrucciones página 9

1 Mount the Wall Plate
VF2022
NOTE: Use awl to verify stud location.
CAUTION:
Avoid potential personal injuries and
property damage!
 Any material covering the wall must not exceed 16
mm (5/8 in.)
 Minimum wood stud size: common 51 x 102 mm (2 x
4 in.) nominal 38 x 89 mm (1.5 x 3.5 in.)
CAUTION:
damage! Pilot holes MUST be drilled to a depth of 51mm
(2 in.) using a 3mm (1/8 in.) diameter drill bit.
51 mm
(2 in.)
[11]
[12]
6901-170180 <05>
35-43 cm
(14-17 in.)
Avoid potential injuries or property
[12]
[02]
< 16 mm
(5/8 in.)
CAUTION:
Tighten the lag bolts [12] only until the washers [11] are
pulled against the wall plates [02].
[11]
[02]
12 mm 3mm
(1/8 in.)
(7/16 in.)
Level the wall plates
[02] and mark the hole
locations.
[02]
Do not over-tighten the lag bolts [12].
[02]
[12]
[11]
[12]
[11]
[02]
9