1 Mount the Wall Plate
VF2012
< 16 mm
(5/8 in.)
[11]
[12]
8
NOTE: Use awl to verify stud
location.
CAUTION:
Avoid
potential personal injuries
and property damage!
Any material covering
the wall must not
exceed 16 mm (5/8 in.)
Minimum wood stud
size: common 51 x 102
mm (2 x 4 in.) nominal
38 x 89 mm (1.5 x 3.5
in.)
CAUTION:
Avoid potential
injuries or property damage! Pilot
holes MUST be drilled to a depth of
51mm (2 in.) using a 3mm (1/8 in.)
diameter drill bit.
51 mm
(2 in.)
[12]
[02]
[11]
[02]
12 mm
(7/16 in.)
CAUTION:
tighten the lag bolts [12]. Tighten the
lag bolts [12] only until the washers
[11] are pulled against the wall plate
[02].
[12]
[11]
[12]
3mm
(1/8 in.)
Level the wall plate
[02] and mark the hole
locations.
[02]
Do not over-
[02]
[11]
[02]
6901-170180 <05>