Front Panel - Mvision SX-5 USB Manual Del Usuario

GENERAL INFORMATION
III. REMOTE CONTROL UNIT (RCU)
Setting Method
1. 3 digits Setting Method
1) Turn of the TV
2) Press the "TV" Key and "OK" at the same time for more than 2 seconds. Then the TV LED will turn
on/off 2 times.
3) Refer the TV Brand List and Press the three numbers. (TV LED will turn on/off 2 times. If the three
numbers is wrong, TV LED turn on/off 1 time)
4) If there are a few pf fixed numbers in the Brand, repeat the step, until the TV turns off.
5) If the TV turns off, press the "OK" Keay. (If the setting is done properly. the LED of the RCU will turn
on/off 2 times)
6) Check if the POWER and other buttons of the RCU are working properly.
7) If the POWER button works but the other buttons does not work, start again from the stop 1) (In some
Brands, other buttons except POWER can not work properly)
� For VCR & DVD, same procedure as above.
∙If you don't press three numbers within 10 seconds, setting will be failed.
∙If you can not find the fixed number with the above method.
2. Auto Search Method
1) Turn on the TV
2) Press the "TV" key and "OK" at the same time for more than 2 seconds. Then, the TV LED will turn
on/off 2 times.
3) Press the "UP" key until the TV turns off (If you want to search from the reverse, press the "DOWN" key)
4) If the TV turns off, press the "OK"key.
(If the setting is done properly. the LED of the RCU will turn on/off 2 times)
5) Check if the POWER and other buttons of the RCU are working properly.
6) If the POWER button works but the other buttons does not work, start again from the procedure 1)
(In some Brands, ther buttons except POWER can not work properly)
� For VCR & DVD, same procedure as above
∙If you don't press three numbers within 10 seconds, setting will be failed.
3. How to check current setting number
1) Press the "TV" key and "OK" at the same time for more than 2 seconds. Then, the TV LED will turn
on/off 2 times.
2) Press the "info" key within 3 seconds.
3) TV LED blinks to show the current setting number in order. (TV LED blinks 10 times to show 'o'
Ex) If the current setting number is 350, the TV LED blinks 3 times, 5 times and 10 times
� For VCR & DVD, same procedure as above.
6
GENERAL INFORMATION
IV. FRONT PANEL
① ②
1. POWER Switches the receiver power On and Standby.
2. CH Up/Down Channel up / down or selects the item of Menu.
3. VOL Up/Down Volume up/down or selects the item of Menu.
4. USB PORT Connects to USB device.
5. USB PORT DivX file play.
"All USB 2.0 flash drive may not be compatible with the product"
③ ④ ⑤
7