Sonos Bundle 250 Guía De Producto página 37

Sonos Bundle 250
• Be sure that your cable/DSL modem is connected to the router's WAN (Inter-
net) port.
• Temporarily remove any other components that are wired to your network.
• Connect an Ethernet cable from the computer directly to the back of the
ZonePlayer (or ZoneBridge if you purchased one separately), and then connect
another Ethernet cable from the ZonePlayer directly to one of the LAN ports
on your router.
• When you make a change to your network configuration, you may need to
power cycle the ZonePlayer by unplugging the power cord, and then plugging
it back in.
• If you are not using a router, visit our Web site at
http://faq.sonos.com/norouter for more information.
Check the wiring
3.
Check the link/activity lights on both the router and the Sonos component. The link
lights should be lit solid, and the activity lights should be blinking.
• If the link lights are not lit, try connecting to a different port.
• If the link lights still do not light, try connecting a different Ethernet cable.
25