Step By Step Rigging - NEILPRYDE RS One Manual Del Usuario

STEP BY STEP RIGGING

1. Set the mast extension and boom to
the recommended lengths. Insert the
mast up the luff pocket without threading
through the cams (above the battens).
Use the rigging handle located at the
bottom of the tack fairing to help thread
your mast approx. 3/4 of the way up
the sleeve. Once the top of the mast
reaches the last 1/4 of the luff sleeve,
Take hold of the mast in the boom
opening and reach up the sleeve as
far as you can to pull the mast into the
top of the sail.Do not use the rigging
handle to force the mast right to the
top of the sleeve, as this may damage
your sail.
Check if the head cap is engaged with
the top cap of the mast by inserting your
finger and feeling if the mast is all the way
up the sleeve.
13