Crosscall Power Pack Manual De Instrucciones página 5

USING THE POWER RESERVE TO CHARGE A DEVICE.
1. Connect your cable (not supplied) to one of the two USB ports
2. Press the on button, and the charge will start automatically. Some
products require pressing briefly to start charging
3. After charging, remove the USB cable
USING THE TORCH
1. Press the on button until the torch turns on
2. To make the torch flash, press the on button a second time
3. To turn off the torch, press the button a third time
SAFETY AND USE OF THE BATTERY:
Use with the correct charger
Do not throw into fire
Do not incinerate
Do not short-circuit
Do not expose to temperatures above 60 °C / 140 °F or direct
sunlight
Recycle according to the standards in force
WARNING:
• Small parts may cause choking.
• Avoid extreme temperatures.
• Do not keep your device in extremely hot or cold places. (-10°C /
+60°C)